Basic cisco Troubleshooting Commands

Troubleshooting Commands
When problems arise on Cisco devices, there are a number of show commands you can use to help identify what the problem is. The following table lists popular show commands:
Command(s)
Result
show running-config
Displays the running configuration stored in VRAM.
show startup-config
Displays the startup configuration stored in NVRAM.
show ip interface brief
Shows a summary of the interfaces and their status.
show interfaces
Displays detailed information about each interface.
show interface serial 0/0
Displays detailed information about a specific interface.
show ip route
Displays the routing table.
show hosts
Displays the host name table.
show controller serial0/1
Displays whether the serial interface is a DCE or DTE device.
show ip protocols
Displays what routing protocols are loaded.
show cdp neighbors
Displays basic information about neighboring devices such as name, type of device, and model.
show cdp neighbors detail
Displays detailed information about neighboring devices such as name, type of device, model, and IP address.



0 comments:

Post a Comment